HIGHSIDER BUTTON SWITCH, CHR

HIGHSIDER Classic push button, suitable for 7/8" and 1" handlebars.

CNC milled switch with two buttons. Can be used universally to control load relays, switch various modes on speedometers, etc.

Connections:

• Button A : green and red (from below).
• Button B : green and brown Green is input signal

Dimensions:

• Button Ø: 4.5 mm
• Rubber: 75 mm x 0.3 mm
• Allen screws: M3x 5 mm
• Cable length 570 mm

Scope of delivery:

• 1x push button
• 1x rubber
• 2x screws

Note: NOT FOR CURRENTS over 0.05 amps. So at 12 volts max. 0.6 watts.