HIGHSIDER ROCKET LED rear light - suitable for mounting or fitting - with black aluminium ring and tinted glass. E-approved for rear.

There are 6 very bright SMD LEDs in the centre. The outer ring consists of COBs (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with currently the best possible efficiency and service life. In addition, higher light values can be achieved than with conventional LEDs. This combination is supplied with a black anodised aluminium ring that fits over the base body.

The best is saved for last - the HIGHSIDER tail light and tail light/turn signal series give you the safety you need and the look you want - whether cruiser, sports bike or scooter.

Dimensions
A1: 18 mm
A2: 15 mm
D1: 45 mm
D2: 43 mm
Mounting bolt: M8 x 1.25 mm, length: 18 mm

Connections:
Black cable = ground (-)
Yellow cable = rear light (+)
Red cable = brake light (+)

Scope of delivery: 1 piece

Hint:
The combination can be installed flat without an aluminium ring, so that only the lens is visible. For this purpose, a 40 mm wide hole must be drilled. Alternatively, the combination can be mounted with the aluminium ring on e.g. a retaining plate on the vehicle.

Further accessories from the HIGHSIDER CLASSIC series
Your bike - your project: turn your classic bike into an individual highlight with the HIGHSIDER CLASSIC products - with classic round shapes into an aesthetic style icon!