This blue silicone hose and clip kit will suit the YZF-R1 and YZF-R1M (2015 onwards) and MT-10 and has been manufactured from highest quality silicone. It will replace the stock radiator hoses and is guaranteed not to perish or fade.

Designed to operate at temperatures from -50°C up to +180°C and at operating pressures of 2.5 – 15 bar meaning running temperatures can be reduced by up to 5°C.

Eazi-Grip hoses feature an easy-to-maintain heat resistant surface that also offers fantastic abrasion resistance and will remain pliable for life.

• Manufactured with multi-layer reinforcement
• Stronger than OEM hoses
• Easy to fit
• Meet or exceed requirements of SAE J20 R1 Class A
• Suitable for road or race use
• Designed in the UK

Will suit the following models (last updated 20th March 2024):

Yamaha YZF-R1 / M (2015 - onwards)
Yamaha MT-10 (2016 - onwards)

Fitting:

Ensure the engine is cold and release any pressure in the cooling system. Drain the cooling system. Identify each hose in the kit and match to the equivalent hose on the bike. Remove and replace each hose one at a time, taking care to return each hose clip to it's original position.

Ensure hoses are in the correct orientation and not fouling or rubbing any other parts. Tighten the hose clips to 3 to 3.5 Nm

Refill the system with specified coolant and mix and bleed the system as per manufacturer's instructions. If in any doubt, consult a professional to carry out the fitting.