Replace the original turn signals on your motorcycle with the Puig AX universal indicators to give it a new look. Flashing black with amber glass (63,4x18,2mm) that is unique in that it is constructed entirely of LED lights. It is a certified product with the E-mark certification. The function of the turn signal.

Information about the technology
It's worth noting that because most bikes employ bimetallic relays, their frequency is exactly proportional to the amount of current flowing through the circuit. When you replace them, the amperage changes, and the blinking frequency changes as well.

Electronic relays, whose frequency is independent of the amperage, should have no effect on flicker.

If we have any worries regarding the relay on our motorcycle, we should instal the indicator and check the frequency.
The turn signal bulb should also be considered; if the power of the bulb fluctuates, we must replace it with one of the same power, which is available in our inventory. 

If we select for an LED bulb, we have two possibilities for adjusting the blink frequency:

One resistance must be added in parallel to the circuit on the right side, and another must be added to the circuit on the left side. The resistance Ref. 42980 must be used if all four flashers are changed, while the resistance Ref. 58730 must be used if only two are replaced.

There are some motorcycles on the market that do not have a specific relay, making it impossible to replace them. It's also worth noting that if more than one relay is involved in the blinking process, simply replacing one will not cure the problem.