This product will let you attach a phone, radio or GPS unit to any bar that is between 0.5" and 1.25" (1.27cm and 3.17cm) in diameter (eg. handlebars). It includes a zinc-coated bar mount, adjustable socket arm, and a universal "finger grip" holder.

The adjustable socket used the RAM 1" ball size and can be adjusted at both ends, allowing for an infinite amount of viewing angles. The rubber ball design also dampens vibrations, for better viewing and extending the life of your device.

The universal finger grip holder is designed to hold a large range of different phones, radios, and GPS units. It comes with three sets of four flexible rubber coated fingers which are placed along the sides to grip your device. The fingers open by squeezing the ends to open the small finger arms, and the bottom of the holder has a back plate that supports the device even further. The spine plate has the universal AMPs and 1.5" a 2" hole patterns on the back. 

Height Dimensions:
Minimum with Top and Bottom Plates: 5.25" (13.33cm)
Maximum with Top and Bottom Plates: 6.0" (15.24cm)
The top and bottom plates can be removed for larger devices.

Spine Plate Dimensions: 
3" Width x 3" Height (7.62cm)

Using Short Arm Side Clamps:
Maximum Depth: 0.75" (1.90cm)
Minimum Width: 1.25" (3.17cm)
Maximum Width: 3.0" (7.62cm)

Using Medium Arm Side Clamps:
Maximum Depth: 1.25" (3.17cm)
Minimum Width: 1.5" (3.81cm)
Maximum Width: 3.5" (8.89cm)

Using Long Arm Side Clamps:
Maximum Depth: 1.6" (4.06cm)
Minimum Width: 2.25" (5.71cm)
Maximum Width: 3.5" (8.89cm)

Features:

• Material: High Strength Composite and Powder Coated Marine Grade Aluminium
• Ball Size: 1" Rubber Ball "B" Size
• Made in the USA and comes with a lifetime warranty
• Weight: 472 grams

Note: The "U" in the part number reflects product packaged in poly bag.

Installation Instructions (PDF)

Demonstration Video

Availability:

RAM Mounts supply is pretty good in Australia, but they have thousands of parts so we can't stock them all on our shelves. If our site shows this item as in stock in our warehouse (see above), great! It will ship immediately from our warehouse. If it shows as Pre-Order, we get fortnightly shipments from RAM Mounts and our site should show if it's in stock in Australia.

• If in stock in Australia we can have it in about a week or less
• If it's not in stock in Australia, unfortunately the ETA can be quite long, as RAM Mounts in the USA have a manufacturing lead time of 6-8 weeks. But if you'd like to contact us we can find out a more accurate ETA for you